Which powders do you supply?

Three: Audental TC4 titanium alloy (Ti-6Al-4V), and two cobalt-chrome grades: Cobalt SLM for crown and bridge, Cobalt H for removable frameworks.

Which printers do they run on?

The Space Ti-160 and the compact Mini-100, both of which we also supply. Tell us which machine you run and we will confirm the material set with the quote.

What comes with the powder?

An IdentAlloy® certificate for every batch, naming the alloy classification and composition. The product-label markings are ISO 22074, ISO 13485 and CE 0197.

How is pricing handled?

Powder is quoted per order: alloy, quantity and delivery schedule all move the number. Use the Get a Quote button on any of the three above and we price it the same business day.

Dental materials

Metal Powder

Name: HiZir LLC
Address: 2540 Metrocentre Blvd Ste 4, West Palm Beach, FL, 33407, US
Telephone: +1 (314) 403-5175

Audental titanium and cobalt-chrome powders for dental metal printing. Each material is supplied with its IdentAlloy® certificate. Materials are quote-based.

ISO 22074ISO 13485CE 0197

Product-label markings.

Crown & bridge · RPD · implant-supported

Titanium alloy

Audental TC4 SLM Powder

TC4 (Ti-6Al-4V), the aerospace-grade titanium alloy: biocompatible and about half the weight of cobalt-chrome.

Composition

Ti 90%
Al 6%
V 4%
N, H, O, C < 1% each

IdentAlloy® certificate 99657 Rev.00 8/23

Audental Metal Technology Co., Ltd.

TITANIUM

SLM-printed dental frameworks on a build plate

Crown & bridge

Cobalt-chrome alloy

Audental Cobalt SLM Powder

A molybdenum- and tungsten-bearing cobalt-chrome for metal-ceramic work, the long-standing choice for porcelain, rated by the manufacturer for spans up to 16 units.

Composition

Co 61.5%
Cr 28.1%
Mo 5.3%
W 5%
Si 1%
Fe, Mn < 1% each

IdentAlloy® certificate 99655 Rev.00 8/23

Audental Metal Technology Co., Ltd.

Predominantly Base (PB)

Removable prosthetics

Cobalt-chrome alloy

Audental Cobalt H

Formulated for removable partial denture frameworks produced by laser sintering. Its higher tungsten content and absence of molybdenum are what separate it from the crown-and-bridge grade.

Composition

Co 61.5%
Cr 27.8%
W 8.5%
Si 1.5%
Mn, Fe < 1% each

IdentAlloy® certificate 109199 Rev.01 3/25

Audental Metal Technology Co., Ltd.

Cobalt Base (PB)

Mechanical data

How the three compare

Test values, with the standard’s minimum shown where one is specified. A dash means we hold no published figure for that material. Nothing here is carried across from a sibling product.

Property	TC4 SLM PowderTitanium alloy	Cobalt SLM PowderCobalt-chrome alloy	Cobalt HCobalt-chrome alloy
0.2% offset yield strengthStandard ≥ 360 MPa	950 ± 50 MPa	600 MPa	600 ± 50 MPa
Elongation after fractureStandard ≥ 2%	13 ± 2%	8%	15 ± 5%
Young's modulus	110 ± 10 GPa	220 GPa	200 ± 20 GPa
Metal-ceramic bond strengthStandard > 25 MPa	> 30 MPa	—	> 30 MPa
Density	4.5 g/cm³	8.6 g/cm³	8.5 g/cm³
Hardness	—	365 HV10	—
CTE	—	14.1 × 10⁻⁶ K⁻¹	—
Particle size	—	10-60 µm	—

TC4 and Cobalt H figures from HiZir’s published materials comparison; Cobalt SLM figures from Audental’s SLM POWDER data sheet.

Audental Cobalt SLM Powder

Nickel and beryllium-free
Rated by the manufacturer for spans up to 16 units
Biological testing to ISO 10993 / ISO 7405
Physical, chemical and mechanical testing to ISO 13356 / ISO 22674

Choosing a material

Titanium or cobalt-chrome?

Both still have a place. Cobalt-chrome is the stiffer alloy and the long-standing choice for porcelain work; titanium is far lighter and the stronger of the two. Tell us the case and we will tell you which we would use.

~½: the weight of cobalt-chrome; 4.5 g/cm³ against 8.5: the same framework comes out at roughly half the mass.
~2×: stiffer in cobalt-chrome; 200 GPa against titanium's 110 GPa, which is why cobalt-chrome still holds long spans.
+58%: yield strength in TC4; 950 ± 50 MPa against 600 MPa, while still elongating 13% before fracture.
0%: nickel and beryllium; Neither element appears in TC4 or in either cobalt-chrome grade.

Questions

What labs ask about the powders

Which powders do you supply?: Three: Audental TC4 titanium alloy (Ti-6Al-4V), and two cobalt-chrome grades: Cobalt SLM for crown and bridge, Cobalt H for removable frameworks.
Which printers do they run on?: The Space Ti-160 and the compact Mini-100, both of which we also supply. Tell us which machine you run and we will confirm the material set with the quote.
What comes with the powder?: An IdentAlloy® certificate for every batch, naming the alloy classification and composition. The product-label markings are ISO 22074, ISO 13485 and CE 0197.
How is pricing handled?: Powder is quoted per order: alloy, quantity and delivery schedule all move the number. Use the Get a Quote button on any of the three above and we price it the same business day.

Materials ship with their IdentAlloy®/IdentCeram® certificates.

+1 (314) 403-5175