Browse 3D PRO by shade, view ST discs by inventory product code, or open HT White directly. Unverified prices are shown as “Not available.”
Order pad
Every shade and thickness on one sheet.
43 shades across 8 thicknesses. Type quantities straight into the grid instead of opening a page per disc.
White zirconia discs for post-sinter staining.
1 product · 10-25 mm · From $23.00
Choose thickness →Flexural strength and translucency as published by the manufacturer, manufactured to ISO 13356. Every disc is 98 mm and stocked from 10 mm to 25 mm.
| Series | Strength | Translucency | Reach for it when |
|---|---|---|---|
| 3D PRO | 650–1100 MPa | 42–49% | Anterior through posterior, in one discGraded: the strength sits low in the disc and the translucency high, so one blank covers the cervical and the incisal. |
| ST | 1100 MPa | 43% | Crowns and bridges, full-contour posteriorsPreshaded, so the shade is in the blank before it is milled. |
| HT | 1350 MPa | 37% | Frameworks, implant bridges, full arch, bruxersWhite, for staining and layering after sintering. |
What 3D PRO is
Multi-colour and multi-strength together.
Most zirconia is one layer, or several layers that only change colour. 3D PRO grades three properties at once down the height of the blank, which is why it reads closer to a natural tooth than a single-layer or simple multilayer disc.
Shifts from cervical to incisal within the one disc, so the transition is in the material rather than in your staining.
More translucent towards the incisal edge, more opaque at the cervical, the way a natural tooth reads.
Distributed gradually from top to bottom, so the strength sits where the load does.
Every shade
Questions
Zirconia work
